2ft 15W VersaT8 LED Tube – Ballast Compatible or Bypass – (UL+DLC)
Available Options
| Thumbnail | SKU | Description | Stock | Price | Quantity | |
|---|---|---|---|---|---|---|
 | GT-T8-15W600BIXX5KDC | 0 | | |||
| GT-T8-15W600BIXX5KDC | 0 | | |||
| GT-T8-15W600BIXX5KDC | 0 | | |||
| GT-T8-15W600BIXX5KDC | 0 | | |||
| GT-T8-15W600BIXX5KDC | 0 | | |||
| GT-T8-15W600BIXX5KDC | 0 | | |||
| GT-T8-15W600BIXX5KDC | 0 | | |||
| GT-T8-15W600BIXX5KDC | 0 | | |||
| GT-T8-15W600BIXX5KDC | 0 | | |||
| GT-T8-15W600BIXX5KDC | 0 | | |||
| GT-T8-15W600BIXX5KDC | 0 | | |||
| GT-T8-15W600BIXX5KDC | 0 | | |||
| GT-T8-15W600BIXX5KDC | 0 | | |||
| GT-T8-15W600BIXX5KDC | 0 | | |||
| GT-T8-15W600BIXX5KDC | 0 | | |||
| GT-T8-15W600BIXX5KDC | 0 | | |||
| GT-T8-15W600BIXX5KDC | 0 | | |||
| GT-T8-15W600BIXX5KDC | 0 | |
- Description
- Additional information
- Installation
Description
The VersaT8 is our premier LED tube and works with most T8 electronic ballasts. The advantage to this tube is its versatility. Not only can this tube work with a ballast, it can also work without a ballast, directly wired into AC100-277V. The power consumption of these LED lights ranges from 15-20W from 3000K to 6000K. These eco-friendly bulbs have a lifespan up to 50,000 hours or more and can save you up to 60% in power consumption. These are the highest quality products on the market today – they are UL and DLC Listed and come with a 5-year warranty!
Additional information
| Color | Cool White, Natural White, Warm White |
|---|---|
| Trim | Clear Trim, Frosted Trim |
| Qualification | DLC, UL Listed |
| Power | 15W |
| Color | 3000K, 4000K, 5000K |
| CRI | > 80 |
| Operation Temperature | -22 to 104°F |
| Input Voltage | 100-347VAC with ballast, 100-277VAC without ballast |
| Frequency | 50-60 Hz |
| Lifespan | 50,000 hours |
| Lumens | 130 -149 lm/w with ballast, 135-149 lm/w without ballast |
| Beam Angle (°) | 120° |
| Warranty | 5 years |
| Power Factor | More than 0.99 |
| Housing | Aluminum |
| Efficacy | 126 |
| Voltage | 3000K, 4000K, 5000K |
1. Check the ballast installed in the field and make sure the ballast is in manufacturer’s ballast list which can be found below. If the ballast out of the manufacturer’s ballast list, a test may be needed before any mass installation.
2. Loose and damaged lamp holder and socket need to be adjusted or be replaced.
Installation Procedure
Note: You will need to bypass the ballast for retrofit installations.
Wiring
Installation Manual
Click here to download the installation instructions above.
Product Spec Sheet
Click Here to view the Product Spec Sheet.
