4ft 15W VersaT8 LED Tube – Ballast Compatible or Bypass – (UL+DLC)
Available Options
Thumbnail | Color | Trim | Stock | Price | Quantity | |
---|---|---|---|---|---|---|
![]() | Cool White | Clear Trim | Out of stock | |||
![]() ![]() ![]() ![]() ![]() ![]() ![]() | Cool White | Frosted Trim | Out of stock | |||
![]() ![]() ![]() ![]() ![]() ![]() ![]() | Natural White | Clear Trim | Out of stock | |||
![]() ![]() ![]() ![]() ![]() ![]() ![]() | Natural White | Frosted Trim | Out of stock | |||
![]() ![]() ![]() ![]() ![]() ![]() ![]() | Warm White | Clear Trim | Out of stock | |||
![]() ![]() ![]() ![]() ![]() ![]() ![]() | Warm White | Frosted Trim | Out of stock |
- Description
- Additional information
- Installation
Description
The VersaT8 is our premier LED tube and works with most T8 electronic ballasts. The advantage to this tube is its versatility. Not only can this tube work with a ballast, it can also work without a ballast, directly wired into AC100-277V. The power consumption of these LED lights is 15w and available in 4000K to 5000K colors. These eco-friendly bulbs have a lifespan up to 50,000 hours or more and can save you up to 60% in power consumption. These are the highest quality products on the market today – they are UL and DLC Listed and come with a 5-years warranty!
Our led tubes replace T8/T12 32w to 40w fluorescent.
Additional information
Color | Cool White, Natural White, Warm White |
---|---|
Trim | Clear Trim, Frosted Trim |
Qualification | DLC, UL Listed |
Power | 15W |
Color | 3000K, 4000K, 5000K |
CRI | > 80 |
Input Voltage | 100-347VAC with ballast, 100-277VAC without ballast |
Frequency | 50-60 Hz |
Lifespan | 50,000 hours |
Lumens | 130-149 lm/w with ballast, 135-149 lm/w without ballast |
Beam Angle (°) | 120° |
Warranty | 5 years |
Power Factor | More than 0.99 |
Housing | Aluminum |
1. Check the ballast installed in the field and make sure the ballast is in manufacturer’s ballast list which can be found below. If the ballast out of the manufacturer’s ballast list, a test may be needed before any mass installation.
2. Loose and damaged lamp holder and socket need to be adjusted or be replaced.
Note: You will need to bypass the ballast for retrofit installations.
Click Here to download the installation instructions above.
Ballast Compatibility List
Click Here to view List.